Industrial Fencing Bastion Security Fencing Bastion V Systems

Fencing Systems

Fencing Systems Menu

Product Search

Product Name	Cat Code
Bastion Fencing System	74 01 H
Bastion Post Systems	74 01 K

Bastion V/VT Fencing Systems

Bastion V

Bastion V is a modern and visually appealing heavy weldmesh fence panel ideally suited for most types of boundary, general and anti-intruder applications.

Specification

Bastion V Panels are manufactured from 4.5mm thick steel wire with profiled horizontal sections that significantly increase the rigidity of the panel. The mesh itself is 50mm x 200mm and fully welded at every intersection. The panels have a barbed edge and a flush edge.

The client has the option of installing the barbed edge at the top of the fence, as a deterrent to climbing, or at the bottom, for example where the fencing is one of the lower heights in a playground situation. Please be aware, however that if you require the barb down option then an inverted clip will need to be ordered. The width of the V panels suits post centres of approx. 3030mm and the following heights are available as standard:-

Type	Panel Height	Panel Width	No of Clips Per Posts
V 1800	1810mm	3000mm	7
V 2000	2010mm	3000mm	8
V 2400	2410mm	3000mm	8

Posts

The Hexaclip RHS posts are manufactured from 60mm x 40mm steel section and have a unique, patented fixing method specially designed to give maximum possible resistance to vandalism and attempts to force entry. The welded mesh panels are located on the face of the post with two piece clips fixed with ´anti-tamper&Acute; bolts. These clips firmly clamp the end vertical wires, providing and extremely secure fixing.

Where safety is key, particularyly on lower height systems used in a playground setting, the panel can be installed so the flush edge is at the top of the fence so there are no sharp hazards. If opting to install, barb-down inverted clips need to be ordered.