Railings

Vertical Bar Railings

Vertical Bar will give the traditional, long lasting, solid boundary fence required. Ranging from 1.2m to 2m in height vertical bar is available in blunt, spiked or doomed tops.

Non-standard length, raked, radiused or stepped panels can be manufactured to individual requirements, along with matching gates to any width or height. Vertical Bar is supplied as a standard with a 100mm maximum gap, rolled steel joint posts, angle cleats, security fixings and round bar verticals. Box section posts and square bar verticals can be supplied if specified. The bar size increases with the height of the fence to comply with BS 1722 part 9.

Finish is either Hot Dip Galvanised to BS EN ISO 1461 or Galvanised and Polyester Powder Coated.

Estate Fencing

During the victorian age, Estate Fencing was probably the most common fencing erected on country estates throughout Britain. The fence had the strength to contain cattle without being visually obtrusive on the landscaped parkland. Today McArthur Group offer Estate Fencing in a range of styles at competitive prices.

Such ranges include Sterndale Continuous Bar, which comes in a varied amount to suit the installers desire length and comes in a height of 1200mm. The moorland fencing range follows a similar pattern to that of the Sterndale with lengths varied to the installers choice.

To Compliment the Estate Fencing McArthur Group offer single leaf and double leaf gates to match, as well as, Kissing Gates and Tree Guards.

Playground Railings

McArthur Group offer two designs of Playground Railings Fencing, Playground Railings Bow Top and Playground Railings Flat Top. Playground Railings are designed to meet the requirements of BS EN 1176 Playground equipment specification with the gaps not exceeding 89mm and free from any neck entrapments.

Two specifications are available. Standard which has a 12mm diameter infill or heavy duty with 16mm diameter infill. it is available in standard panels set at 2800 panels centres from stock or manufactured in a non-standard length, raked or radiused panels to suit individual requirements.
Playground Railings are supplied either Hot Dip Galvanised to BS EN ISO 1461 or Galvanised and Polyester powder Coated to a comprehensive range of colours.

Security Railings

McArthur Security Railings are a strong, durable, and yet cost effective boundary fence. It is fabricated from circular hollow section verticals, set at a maximum 100mm gap and welded to mild steel horizontal flat rails with RSJ support posts.

McArthur Security Railings are available in three heights 1800mm, 2000mm & 2400mm and is supplied with special angle cleats to overcome uneven ground along with permacone fixings for added security

McArthur Security Railings Elite Fence has forged tops onto the vertical hollow sections which visually enhance all the standard features of the Roundex® Fence creating an appealing security fencing system. It is commonly specified to the front of premises to offer that extra impact, when standard McArthur Security Railings are used elsewhere on site.

Pedestrian Guardrails

Designed to protect adults and children at road junctions and crossings, Pedestrian Guardrails are also ideal as perimeter fences to running tracks and play areas. Standard panels are 2m long and manufactured from 50 x 30mm RHS frame with either a 12mm or 16mm diameter infill set at 110mm centres.

Hot Dip Galvanised to BS EN ISO 1461 or Galvanised and Polyester Powder Coated. McArthur Group can also supply Special Guardrail Panels to individual customer requirements.

Gates

Prosafe® Hydraulic Self Closing Gate is manufactured to comply with BS EN 1176 for playground equipment, making it free from finger traps, crush points and shear actions that could cause injuries. This mechanism makes Prosafe® Self Closing Gate virtually impossible to slam shut and prevents it from bouncing back when pushed hard. It has an anti-trap mechanism and cannot swing beyond its stop point. The gate is adjustable and can be set to conform with ROSPA's Gate recommendations.

Available 1000mm or 1200mm high, in a Hot Dip Galvanised to BS EN ISO 1461 or Galvanised and Polyester Powder Coated finish. Standard colours are Yellow RAL 1021 or Red RAL 3000 but all other colours are available on request.

Share This Page