Untensioned Safety Barrier

Untensioned Safety Barrier

The McArthur Group is one of the leading trade merchants of untensioned safety barrier to contractors & commercial applications throughout the UK. Our complete range of untensioned safety barrier components, when combined offer great segregation between vehicle & pedestrian traffic as well as implementing obstructive controls in industrial sites & protecting buildings (& machinery) from any unwanted accidental collision, damage & cost.

Untensioned Safety Barrier Beams

• Divide your total length requirement by 3200mm (Untensioned barrier beams are manufactured in 3200m units.
• Any non-standard untensioned barrier residual lengths please contact your local McArthur Group branch.
• 8 lap bolts will be required per unit (including residual lengths).

Untensioned Safety Barrier Posts

• Confirm untensioned safety barrier spacing at 3200mm (for light applications) or 1600mm (for standard applications).
• Add 1 untensioned safety barrier post for each end
• Add 1 untensioned safety barrier post for each corner.
• A single post bolt is required per post per beam

Untensioned Safety Barrier Corners

• Add one untensioned safety barrier post for each corner
• 8 lap bolts will be required for each corner

Untensioned Safety Barrier Ends

• Add one untensioned safety barrier post per end
• 4 lap bolts will be required for each fishtail end
• Add 8 lap bolts per type ‘D’ End terminal

If any of these requirements are difficult to determine, or if you have a unique scenario that needs further investigation, McArthur Group would be happy to assist.

Our untensioned safety barrier components form part of our industrial fencing portfolio.

Share This Page