blue stripe Main Menu yellow stripe
Home News Products Contact Us Delivery Branch Locations History Downloads Trade Shops Links McArthur Cyclone
Home News Products Contact
Us		 Delivery Location History Download Trade
Shops		 Links Cyclone

McArthur Group Ltd

Distributors of a wide range
of Agricultural, Building and Fencing Products.


click here Kee Klamp ProductsKee Klamp

Kee Klamp Logo The simple but effective engineering principle of the Kee Klamp fitting is the foundation of the most versatile tube connection available. There are many variations of fitting providing the versatility to achieve virtually any structural configuration

With a range of 8 different sizes of tube available it gives the variety and diversity to satisfy any customer need.

Visit Kee Klamp website for more information

Kee Klamp 1Kee Klamp 2Kee Klamp 3Kee Klamp 4

Tube

Kee Klamp fittings are produced in a range of standard sizes to suit steel tubing to BS EN 10255 (ISO 65) medium and heavy gauge, from 13.5mm to 60.3mm outside tube diameter.

Tubing of other specifications can be used providing the outside diameter is compatible with BS EN 10255 (ISO 65) and the wall thickness is not less than 3.2mm.

Tube sizes are shown in the table below

Key Klamp
Tube Size
Tube Diameter
mm o/d
Nominal Bare
mm
in
2
13.5
8
1/4"
3
17.5
10
3/8"
4
21.3
15
1/2"
5
26.9
20
3/4"
6
33.7
25
1"
7
42.4
32
1 1/4"
8
48.3
40
1 1/2"
9
60.3
50
2"

* Nominal bore is an arbitary dimension because the bore varies with the wall thickness of tubes.

RAL colour chart Finishes

Kee Klamp fittings are supplied hot dip galvanised to BS EN (ISO 1461). Standard steel tube is galvanised to the requirements of BS EN 10255 (ISO 65)

Colours

In addition to this standard finish tube fittings and accessories can be supplied with polyester coating on any RAL colour. It is of a high quality and usually applied to products already galvanised. Should damage occur to the coating, corrosion is still prevented.

Kee Klamp 5Kee Klamp 6Kee Klamp 7Kee Klamp 8


Kee Lite

Kee Lite Logo Kee Lite fittings are made from high grade Aluminium Silicon Magnesium Alloy (A356-T6) which provide for a lightweight, corrosion resistant, and strong alternative for fabrication of tubular structures. Due to the superior corrosion resistance, Kee Lite fittings offer extremely low maintenance in outdoor settings. Kee Lite fittings are only one-third the weight of our iron fittings, with about 75% of comparable tensile strength.


Kee Klamp 9Kee Klamp 10Kee Klamp 11Kee Klamp 12

Kee Lite
Tube Ref
Nom. Bore*
mm
Tube Dia.
O.D. mm
Fitting
I.D. mm
6
25
33.7
35
7
32
42.4
43.5
8
40
48.3
49.5
9
51
60.3
61.5

*Nominal Bore is an arbitrary dimension because the bore varies with the wall thickness of the tube.
Tube sizes are shown in the table.


Kee Guard

Kee Guard Logo Safety - The KeeGuard system not only meets but exceeds current safety requirements for maximum roof edge protection.

Durability - Maintenance free and truely reliable, you can depend on KeeGuard roof edge protection


Kee Klamp 13Kee Klamp 14Kee Klamp 15Kee Klamp 16Kee Klamp 17

Versatility - The KeeGuard pre-fabricated design utilising the lightweight modular counter-weights, allows for maximum versatility on site.

Simplicity - The KeeGuard modular design takes the complexity and cost out of roof edge protection - for good.

click here Kee Klamp Products